Лада-Лист Lada-List
Lada-List
8 (8482) 69 10 20 - Togliatti
8 (499) 141-51-51 - Moscow
8 (863) 285-06-16 - Rostov-on-Don

Weight calculator

mm. mm. mm.

Acceptance of LADA-LIST Company as a member of the Association

Leave your request

I agree to the processing of my personal data in accordance withthe Privacy Policy

ABS/ASA plastic sheet

ASA/ABS plastic sheet is a multilayer sheet. It combines the high mechanical strength of ABS plastic, which is preserved even at sub-zero temperatures, and excellent resistance to weathering and UV radiation, which is provided by the layer of ASA (copolymer of acrylonitrile-styrene-acrylate).

The surface of ASA/ABS sheet plastic can be matte or glossy (like the surface of ABS/PMMA). However, unlike the latter, the ASA/ABS plastic sheet has a higher impact resistance and resistance to bending. ASA/ABS is characterized by chemical inertness to oils, greases, diluted salts, alkalis and dilute acids. Plastic sheet is not resistant to concentrated solutions and organic solvents.

As the material for gluing, methyl ethyl ketones or two-component adhesives can be used.
ASA/ABS plastic sheet can be processed by milling, bonding, laser cutting, welding, cutting, frictional, thermal and ultrasonic welding.

SCOPE

АБС/АСА АБС/АСА АБС/АСА АБС/АСА

ASA/ABS can be successfully used for manufacturing thermoformed parts for both internal and external finishing of cars, buses, tractors, etc. (panels, roof moldings, radiator grilles, etc.), furniture, suitcases, outdoor advertising, lighting, housings for household appliances, construction, etc.:

  1. Construction (facades, roofs, etc.)
  2. Automobile manufacturing (thermoformed parts for both internal and external finishing of vehicles: panels, roof moldings, pillars, radiator grilles)
  3. Manufacturing of housings for light and household appliances
  4. Lighting (ceiling lamps)
  5. Manufacturing of cases for suitcases, furniture
  6. Internal furnishing of lodgements
  7. Production of outdoor advertisement

ABS/ASA (ACRYLONITRILE COPOLYMER-STYRENE-ACRYLATE) FEATURES

Unit Test method, ISO Values
Density g/cm3 1183 1.06
Yield stress MPa 527-2/1B/20 33
Тensile strength at break % 527 15
Charpy unnotched impact strength 23°C kJ/m2 179/1eU
Charpy unnotched impact strength -30°C kJ/m2 179/1eU 22
Charpy notch impact strength 23°C kJ/m2 179/1eA 22
Charpy notch impact strength  -30°C kJ/m2 179/1eA 11
Heat deflection temperature, (НDT)  1.8 MPa °С 75-2Ae 87
 Vicat softening temperature  50N/50°С  °С 306/В50 95

* the above values refer to the thermoplastics immediately after extrusion and do not take into account the impact of ageing.
* sheet properties can vary depending on the properties of the used raw material

ADDITIONAL INFORMATION

CHEMICAL RESISTANCE

resistant to water and water solutions of salts, diluted acids and alkalis, saturated hydrocarbons, plant and animal oils and fats; not resistant to aromatic hydrocarbons, chlorinated hydrocarbons, concentrated inorganic acids, strong oxidants, acetone

PHYSICAL PROPERTIES

it has high hardness, it is resistant to changing temperatures, extremely resistant to weathering, sunlight, the influence of cold, heat, wind, UV

OPERATING TEMPERATURE

usually ABS/ASA withstands short-duration heating to 85°C. Working temperatures: min: -40 … Max: 75°C

FLAMMABILITY INDEX

ignites when exposed to a flame or appropriate amount of heat is supplied; burns brightly and unstably with a lot of soot after it is taken out of the flame; self ignition at 350°C; ignites from an external source at 450°С

ELECTRICAL PROPERTIES

high electrical resistance, high dielectric loss

PROCESSING

  • stamping
  • pneumatic vacuum forming
  • machining
  • printability, varnish
  • hot knurling
  • welding
  • bonding

FORM OF DELIVERY

Thickness: 1-10 mm
Width: up to 2150 m

SURFACE

embossed, smooth, shiny, matte.


© 2005-2019 | All rights reserved | www.zuroplast.ru